Home > MECH PROJECTS > DESIGN AND FABRICATION OF SHAPINGFIXTURE FOR CYLINDRICAL ROD

DESIGN AND FABRICATION OF SHAPINGFIXTURE FOR CYLINDRICAL ROD

ABSTRACT

Generally this fixture is a common device used to hold cylindrical job for carrying out shaping and various operations due to quick loading and unloading capability. In this device used on the shop floor for holding the job during shaping and other machining operation. One of the most common methods of holding the work directly on the shaping machine table is by means of T-Bolt and Clamps. Shaping machines are provided with T-Bolt into which T of T slots usually ranges from 15 to 20mm.

Before performing any operation in a shaping machine it is absolutely necessary to secure the work firmly on the shaping machine table. This shaping fixture has a screw at its one end which is used to level the clamp when its often end rests against the work. The work may be quickly set up without any packing piece.

In this project we have briefly explained about various types of machining process Involved,classification of work holding device and types of clamps and design calculations.

 

Advertisements
Categories: MECH PROJECTS
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: